No walking and Easy start-up

The PorcelainPlus Speedbit was specifically designed for drilling through hard surfaces such as porcelain tile, marble, granite and quartz along with ceramic tile, glass and mirrors.

Using a hand held cordless drill, simply dip the drill bit in a cup of cool water, place the drill bit on the specified mark, apply pressure, listen for a slight CRUNCH and start your drilling process.

Because the Speedbit is a scraping tool it will generate high heat. You will recognize this when the drill bit starts to release smoke.

When this starts happening, stop drilling and re-dip the drill bit into the water. This will cool the bit down and increase its longevity.  Continue this sequence until the hole is completely drilled. For best results your top drilling speed should be between 800 and 1200 RPM’s and slowed down to 500 RPM’s while breaking through the hole. This process will assure you of having clean holes and not broken tile.

Advertisements

Speedbits With Great Durability

The PorcelainPlus Speedbit was specifically designed for drilling through hard surfaces such as porcelain tile, marble, granite and quartz along with ceramic tile, glass and mirrors. Its speed and durability distinguishes itself from other standard bits used on these surfaces.

With a specially formulated mix of metals and superior designed carbide tip, Porcelain drill bit makes your installations quicker and easier, therefore, more profitable.

Superior Designed Carbide Tip

The PorcelainPlus Speedbit was specifically designed for drilling through hard surfaces such as porcelain tile, marble, granite and quartz along with ceramic tile, glass and mirrors. Its speed and durability distinguishes itself from other standard bits used on these surfaces.

With a specially formulated mix of metals and superior designed carbide tip, Porcelain drill bit makes your installations quicker and easier, therefore, more profitable.

Greater Durability And Clean Precise Holes

Porcelain drill bit was specifically designed for drilling through hard surfaces such as porcelain tile, marble, granite and quartz along with ceramic tile, glass and mirrors.  Its speed and durability distinguishes itself from other standard bits used on these surfaces.

FEATURES:

  • Four Point Cross Step Design Spear Tip provides fast and accurate drilling.
  • No walking and rapid penetration. Tape, center punching or pilot holes are not required.
  • Specially formulated carbide tip for greater durability and clean precise holes.
  • Average of 25 seconds per hole (based on PEI Class 4 porcelain tile).
  • Drills 5+ holes per bit (based on PEI Class 4 porcelain tile).

5 Speedbit Trial Pack

We can tell you how great the PorcelainPlus Speedbit is but “seeing is believing” and that is why we are offering this great special. Trial Pack of 5 Speedbit for only $20 {includes shipping}. ORDER NOW!!!

Blog at WordPress.com.

Up ↑